Adding Linksys As Wifi Extender

To adding Linksys as wifi extender, eradicate Wi-Fi dead zones by using a Wi-Fi range extender. It gives us an experience of a stronger and more reliable wireless network that extends to the dead zones of your home. You can enjoy streaming 4K videos and surfing the internet from any region of your home. From the construction components of your home to microwaves, alarm systems, and cordless phones- there is a lot that can get in the way of your home Wi-Fi connection. A Linksys Wi-Fi range extender united with your existing Wi-Fi router, will extend your wireless coverage to the troublesome areas. This lets your smartphones, smart TVs, and computers stay online and connected.

Top 10 Best Wifi Extender For Linksys Router

The best Wi-Fi extenders for boosting your Wi-Fi network for Linksys router are given below.

  • Linksys RE6500 A1200 Dual-Band Wireless Range Extender
  • Linksys Velop Wi-Fi Extender
  • Linksys RE6700 AC1200 Amplify Dual Band Wi-Fi Range Extender
  • Linksys RE6700 Max-Stream AC1900+ Wi-Fi Range Extender
  • Netgear AC1200 Wi-Fi Range Extender EX6150
  • Netgear EX3700 Wi-Fi Range Extender AC750
  • Netgear Nighthawk X4 AC2200 Wi-Fi Range Extender EX7300
  • D-Link Wi-Fi Dual Band Range Extender DAP-1520
  • TP-Link RE350 AC1200 Wi-Fi Range Extender
  • Trendnet Wi-Fi Everywhere Powerline 1200 AV2
adding linksys as wifi extender

How To Setup And Install Linksys Range Extender ?

  • The Linksys Range Extender allows you to repeat the wireless signal of any wireless router.
  • Before you start the installation process of Linksys router and adding Linksys as wifi extender, note your access point’s SSID, channel, and Wireless password or network key.
  • Press and hold the Reset button situated at the top panel of the Linksys range extender for five seconds.
  • Restore the factory default settings and connect your computer to the range extender’s Ethernet port using an Ethernet cord.
  • Now, connect your range extender to the power supply and make sure that the LED lights are stable.
  • On your computer, open an internet browser preferably Google as it can give you faster access to the router’s setup page.
  • Enter your router’s IP address or in the URL bar and tap Enter to launch the setup page.
  • To know your router’s IP address, go to the Taskbar and click the Search icon.
  • Enter cmd and select Command Prompt.
  • In the Command Prompt dialog box, enter ipconfig/all and press Enter.
  • Search for the Default Gateway section and you will notice the router’s IP address.
  • Note the router’ an IP address and type it in the URL bar.
  • A dialog box will prompt on the screen asking for the User name and Password.
  • Leave the User name field blank and enter admin in the Password field.
  • Click Log In and select the Wireless option.
  • Navigate to Basic Wireless Settings and assign the radio button to Manual.
  • Type your Linksys router’s Network Name (SSID) in the respective field.
  • Choose the security settings that are equivalent to your router’s configuration.
  • Enter your network’s password or WEP Key and click Save Settings.
  • Disconnect the power cords of the router and the extender for 25-30 seconds. Now, power on the router and extender to adding Linksys as wifi extender.

How To Connect Linksys Extender To Wifi ?

  • Note the SSID and password of your Wi-Fi network.
  • Connect your Linksys range extender to the power supply and make sure that the lights are stable.
  • Use an Ethernet cord to connect your range extender and computer.
  • Connect the Ethernet cable into the range extender’s Ethernet port.
  • Launch a web browser and enter the Linksys router’s IP address.
  • The default IP address for Linksys router is in the Address bar.
  • In the prompted dialog box, enter the User name and password in the respective fields.
  • Leave the User name field empty and type admin in the Password field.
  • Click Log In and select the Wireless menu. Click the Basic Wireless Settings option.
  • Set the Radio button to Manual and then enter your Linksys router’s SSID.
  • On the Wireless Security tab, choose the security settings that are similar to the router’s configuration.
  • Enter your WEP key and then click Save Settings. Disconnect the power cables from the router and range extender.
  • After some time, power on the router and the range extender.

How To Use A Router As A Repeater ?

  • With the router powered On, press the Reset button located at the bottom of the router.
  • After 30 seconds, your router will reset.
  • Keep holding the Reset button for 25 seconds and disconnect the router’s power cord.
  • On your computer, launch a web browser and enter the router’s IP address.
  • Press Enter to launch the router’s setup page.
  • Go to the Wireless section and select the Basic tab.
  • Set the Wireless Mode to Repeater and choose the wireless network mode that matches your router.
  • Assign the SSID to match your router and choose Podcasting.
  • Click Add under the Virtual Interface menu.
  • Type the new SSID and click Save.
  • Go to the Wireless Security section and under the Physical Interface tab, ensure that the settings match your primary router.
  • Click Save and the router will act as an extender for adding Linksys as wifi extender.

How Does A Wireless Range Extender Work ?

  • The most frustrating issue is the onset of the internet is not receiving proper signals is why you need a wireless range extender.
  • To boost a wireless signal in your home or office, you have to invest in a range extender.
  • Use the Linksys Wi-Fi range extender to broadcast the signal in dead zones.
  • The Wi-Fi range extender pick up your existing access point;
  • Update your router and extender with the latest firmware before you set up the range extender.
  • Although the signal strength varies, range extender signals are generally more reliable and strong than that of a router and adding Linksys as wifi extender.
  • When you connect your router and range extender, you will get the router’s signal even to the most remote place at your home.
  • Launch the router’s setup page and enter the User name & Password in the respective fields.
  • Manually connect your router and wireless range extender.
  • Click Save Settings and then power on the range extender.

Reset Linksys Wifi Extender

  • Launch a web browser on your computer and enter the router’s IP Address in the URL bar.
  • Go to the Management tab and click the Backup Configuration button.
  • Select Save Settings and proceed to press the Reset button.
  • The position of the Reset button may vary from model to model.
  • Press and hold the Linksys range extender’s Reset button for 10 seconds.
  • Power cycle the range extender to complete the reset process.
  • You can also reset the range extender using the Web-based Setup page.
  • Select Factory Defaults under the Administration tab.
  • Click the Restore Factory Defaults option to complete the process.
  • Unplug the Linksys range extender from the power supply and leave it powered off for 25 seconds.
  • Plug the device back to the power supply and the reset process is completed.

Linksys Wifi Extender Not Connecting

  • Check whether your computer is connected to the range extender’s Wi-Fi.
  • To check the connection, click on the Wireless Utility menu on your computer and it will display the SSID on which your computer is connected.
  • If your computer is not connected, choose your wireless network and enter the password. Once connected, you can access the setup page.
  • You can check the status of the extender by viewing the indicator light.
  • Disconnect the power cable of the extender from the power supply. Wait for some time and reconnect the power cord for adding Linksys as wifi extender.
  • A Ping Test can find out the communication between the computer and the range extender.
  • If all the above instructions did not work, proceed to reset the device.
  • Restore the factory defaults and try to access the setup page.
  • To reset your range extender, press and hold the Reset button for 10 seconds.
  • Wait until the LED lights start blinking. The factory defaults will be restored on your Linksys Range Extender.
linksys wifi not connecting

Related Searches For "Linksys Wifi Extender Setup"

Linksys Wifi Extender RE6700 Setup

  • Note the router’s network name and password to adding Linksys as wifi extender.
  • Plug the Linksys RE6700 range extender into the power supply.
  • Wait until the orange light blinks on the range extender.
  • Connect your computer to the Linksys RE6700 range extender’s default SSID.
  • Open a web browser on your system and type in the URL bar.
  • Click Start Setup and the option As a Wireless Range Extender will be selected by default.
  • Click Next and select your Wi-Fi.
  • Enter your Wi-Fi network’s password in the respective field and then click Next.
  • If your Wi-Fi network’s name is not displayed in the list, click Manually Enter Network Name and Password.
  • Change the range extender settings as you prefer and then click Next.
  • The Spot Finder will help you in choosing the right place for the Linksys RE6700.
  • Create an admin passkey to secure your range extender.

Linksys Wifi Extender RE4100W Setup

  • Note the wireless network name and passkey.
  • Connect the Linksys RE4100W into the power supply.
  • Position the range extender midway between your router and the device.
  • Connect your smartphone or computer to the Linksys RE4100W wireless network.
  • Open an internet browser on your computer and enter the router’s IP address or in the address bar.
  • Follow the instructions on the screen and access the web-based setup page.
  • Enter the User name & Password and click OK.
  • You will notice a Confirmation page on the screen.
  • Now,your Linksys RE4100W printer is successfully configured. For more information regarding adding Linksys as wifi extender, contact our technical experts.

Related Articles

Top z