Asus Router Rt Ac66u Setup

Proceed with the steps that are given below for Asus router Rt Ac66u Setup.

Step 1: Initial connections

  • Ensure that the place you choose is near to your internet modem to get a good network connection.
  • Adjust the antenna of the router to a position to get good signal.
  • Connect the Asus router to a power outlet.
  • Connect one end of an Ethernet cable to the internet port on your modem. Plug the other end into the WAN port on your router.
  • Connect your router to your computer using another Ethernet cable.

Step 2: Finding the IP address

Since you have already connected your router to your computer, find the IP address of the router by following the steps given below.

  • Press the Windows + R buttons together from your computer.
  • When the Run dialog box appears, type “cmd” in the Search section. Then, click the OK button.
  • The Command Prompt window will be opened as an Admin user. If not, open Command Prompt as admin.
  • Type “ipconfig” in the Command Prompt window and press the Enter key.
  • The IP address of the router will be available in the Default gateway section.
  • The default IP address of the Asus router is

Step 3: Configuring the Asus router Rt Ac66u Setup

  • Open a new tab on your browser and enter the IP address of the router.
  • Click Next in the ASUS RT-AC66U page to start the setup wizard of the router.
  • Enter the login username and type the password twice in the web interface of the router, and click Next.
  • The default username of the Asus router is admin, and the password is admin.
  • Once the router’s home page is displayed, navigate to the Router Setup section.
  • In the Wireless Setting window, enter the network name (SSID), which will be used to connect to the router from other devices.
  • Type a password in the Network key section. Set the Wireless security as WPA2-Personal for a secured encrypted connection.
  • Make sure to choose a strong password for better security. The password you choose must at least have eight characters, which include an upper case letter, lower case letter, number, and special character.
  • Enable the Copy 2.4GHz to 5GHz settings option. You can also set another SSID and network key for 5GHz.
  • Click on the Apply button to save the settings.
  • Check the Network Configuration Summary page, and click Next.
  • Select Finish once you have configured the wireless network settings.
  • To set Guest Network, go to the General Settings.
  • You can also set Parental Control and Firewall if required.

Connecting to the network:

  • To connect from a Windows computer, click on the Network icon on the taskbar.
  • Choose your network name from the displayed list and enter the password you have previously set to get connected to the wireless network.

Step 4: Firmware upgrade

  • Open the web interface page of the Asus router and log in using the username and password.
  • Go to the Administration section and select the Firmware Upgrade tab.
  • Download the latest version of the software for the router.
  • Now, save the file to a preferred location on your Windows computer.
  • Double-click on the downloaded file and follow the instructions on the screen to complete the update.
  • Once the installation process is complete, turn off your router and on it after a few seconds.
  • Again, open the web interface page of the router and go to the Firmware Update section.
  • Click on the Check button near the Firmware version section.
  • If you find the message that the “The router’s current firmware is the latest version,” your router software is up-to-date.
  • Once you have done the above process, the setup for the Asus router RT AC66U is complete. If you have a further query regarding Asus router Rt Ac66u setup, click the call button available on the screen.
Asus Router Rt Ac66u Setup

Related Articles

Top z