How To Perform Belkin N450 DB F9K1105 Setup?

Belkin N450 DB F9K1105 is a wireless Dual-Band N+ router that broadcasts Wi-Fi via 2.4GHz & 5GHz bands. If you are the first time to perform Belkin N450 DB F9K1105 setup, follow the quick steps given below.

Belkin N450 DB F9K1105 setup

  • First, unpack your router and find a better place to place it.
  • Make sure to keep your router in a place where there is no Wi-Fi interference.
  • If your DSL modem is turned on, unplug its power cord from the electrical outlet to turn it off.
  • Next, connect your router to your modem using the cable attached toyour router.
  • Turn on the modem by connecting its power cord to an electrical outlet.
  • Also, connect your router’s power adapter to a wall outlet andturn it on.
  • Using the supplied network cable (Ethernet), connect your router’s LAN port and computer’s Ethernet port.
  • Next, insert the supplied CD-ROM into yourcomputer’s CD/DVD drive to run the setup program.
  • Make sure to identify the username and password ofyour internet connection.
  • On the CD menu, click the Setupicon and follow the on-screen prompts to personalize your router.
  • Once you have completed the router setup, the Belkin Router Managerappears on the system tray.
  • If your computer doesn’t support the router’s CD-ROM, manually set up the router using the WPS Push Button
  • Start the WPS Push Button Connectionon your computer or any other wireless device.
  • Within two minutes, navigate to your router, press and hold down the WPSbutton until the Wi-Fi light blinks blue.
  • To configure the Internet connection settings, access the router’s settings page using the router’s IP address and login details.
  • After configuring the required settings, click the Savebutton to save the settings.

Now, you would have completed the Belkin N450 DB F9K1105 setup successfully.

Related Articles

Top z