Steps For Belkin Router Manual Setup

If you are setting up a Belkin router for the first time, consider the steps that are given below for Belkin router manual setup.

Belkin router manual setup

  • You have to connect your modem and the Belkin router using a network cable for Belkin router manual setup.
  • Plug in an Ethernet cable to the modem and connect the other end of the cable to your router's WAN port.
  • Make sure to connect your modem and router to power outlets.
  • Insert the Belkin router setup disc that came with the package into the CD drive of your computer.
  • When the installation wizard appears, click Run the Easy Install Wizard.
  • Continue with the instructions on the screen to create a network username and password.
  • If you don't have the installation disc, you can go with the manual setup method.
  • Once you have connected your modem and router using an Ethernet cable, connect the router and computer using another Ethernet cable.
  • For this, connect the Ethernet cable to the LAN port of your router and plug in the other end to your computer.
  • Press the Windows and R buttons together to open the Run dialog box.
  • Type cmd in the search section and tap Enter.
  • Enter ipconfig in the Command Prompt window and hit the Enter key.
  • Find the Belkin router's IP address in the Default Gateway section.
  • The Belkin router's default IP address is Enter the IP address your browser's address bar.
  • Click on the Login button and leave the password section blank. Click Submit.
  • Go to the Internet WAN section and select Connection type as Dynamic.
  • You can set the SSID and password of the network to connect wirelessly.
  • After making the required settings, click on the Apply Changes option.
  • You can now get connected to your network from any device using the network SSID and password. and complete your Belkin router manual setup.
Top z