D-Link Dir-810l Router Setup - Quick Steps

 D-Link Dir-810l Router Setup

Scroll down this page to know how to perform the D-Link DIR-810L router setup for the first time.D-Link DIR-810L is a dual-band cloud router that is suitable for all your wireless networking solutions. Inside the router package, you can find the following components such as DIR-810L Wireless AC750 dual-band cloud router, Ethernet cable, power adapter, and Wi-Fi configuration note.

Features of this dual-band router are listed below:

  • Ultimate FastWireless Networking.
  • Compatible with 802.11a/g/n Devices.
  • Advanced security features.
  • User-friendly setup wizard.

Before you start the router setup, prepare your modem and the computer first.

  • Disconnect the USB cable from your modem if it is already connected.
  • Make sure to use an Ethernet cable for the connection.
  • On your computer, disable or uninstall any PPPoE software if it is installed.
  • Place your D-Link DIR router, modem, and the computer closer to each other.

Now, let’s see the D-Link router setup procedure in detail.

Manual setup

  • Turn off your modem if it is turned ON.
  • If an Ethernet cable is connected to your computer from the modem, then disconnect it.
  • Now, connect the Ethernet cable to the LAN port (which is labeled 1) of your D-Link router. Link the other end of the Ethernet cable to your computer.
  • Using another Ethernet cable, connect the router to your modem. Make sure to connect the cable to the port labeled INTERNET on your router.
  • Reconnect the power cable to your modem.
  • Connect the power adapter to your router.
  • Turn on your router, modem, and computer.
  • Check the status of your router. If the INTERNET LED of your router is solid, then it means your router is connected to the network successfully.

Congratulations! The first step of the D-Link DIR-810l router setup is completed.

Step 2: Web-based configuration

You can configure your D-Link router settings using either D-Link Setup Wizard, QRS mobile app, or Manual Setup. The below section explains the web-based configuration using D-Link Setup Wizard and QRS mobile app.

Method 1: D-Link Setup Wizard

  • Open a web browser on your computer.
  • If you’re configuring your router for the first time on your computer, then as soon as you open the web browser, the Wizard Setup screen will open. If not, enter https://dlinkrouter.local in the URL field of your browser and tap Enter. Sign in to the router’s web access page using the default credentials.
  • Choose the desired connection type and click Next.
  • Perform the on-screen instructions to complete the router setup.
  • Make sure to set the date and time zone correctly.
  • Once the router setup is completed, restart your computer.

Method 2: Using the QRS mobile app

  • Install the QRS mobile app on your Android or iOS device.
  • After installing the app, connect your device to the D-Link router’s network over a wireless connection.
  • Open the app and perform the on-screen D-Link Dir-810l router setup instructions to configure your router settings.

Related Articles

Top z