D-Link Exo Ac1900 Router Setup - Quick Steps

 D-Link Exo Ac1900 Router Setup

Scroll down this page to know how to perform the D-Link EXO AC1900 router setup. D-Link EXO AC1900 is a 2-in-one device that can be used either as a router or a range extender. This router provides extreme coverage and range with high-power amplifiers and uses the AC SmartBeam & SmartConnect technology.

Some of the features of this dual functionality router are listed below:

  • Gigabit Ethernet speed.
  • 4 LAN ports.
  • The guest network allowed.
  • Supports parental Control.
  • Wireless Bands: Dual Band.
  • WAN Interface: Gigabit Ethernet
  • Easy-to-set and easy-to-use.

Inside The Package

  • DIR-879 AC1900 Wi-Fi router
  • Ethernet cable
  • Power adapter
  • Wi-Fi Configuration card.
  • Wall-mount hardware

System Requirements

  • OS: Windows, Mac, and Linux
  • Network requirements: DSL modem or an Ethernet cable, IEEE 802.11 ac/n/g/b/wireless clients, 10/100 Ethernet
  • Web-based configuration: Internet Explorer 10 or higher, Firefox 28 or higher, Safari 6 or higher, Chrome 28 or higher.
  • Mobile requirements: iOS (7.0 or higher), Android (2.3.3 or higher)

Learn how to perform the D-Link EXO AC1900 router setup in detail.

Hardware setup

  • Place the router and your modem closer.
  • Make sure you have extended your router’s antennas properly.
  • Similarly, ensure that the router’s mode switch is set to ROUTER.
  • Now, connect your modem to the Internet using an Ethernet cable.
  • Connect your D-Link to the modem using another Ethernet cable.
  • Turn on the modem first.
  • Wait for one minute.
  • Connect the router to the power adapter.
  • Press the Power button on your D-Link router to turn it ON.
  • Wait for the LEDs of the router to change from orange to solid white.
  • Now, connect your computer to the D-Link router.
  • If your connectivity type is wireless, then go to the Wi-Fi settings section on your computer and select your router’s SSID. Enter the router’s password in the given field.
  • Similarly, if you wish to connect your computer to the D-Link router over a wired connection, then use an Ethernet cable to complete the physical router setup. The router network will be automatically detected by the computer.

Configuring the router settings

You can configure the router settings in three different ways, and they are listed below:

  • QRS Mobile app
  • D-Link Setup Wizard
  • Manual Setup.

The section below explains how to complete the D-Link EXO AC1900 router setup using the QRS Mobile app and D-Link Setup Wizard.

Using The QRS Mobile App

  • On your mobile device, install the QRS Mobile app from the Google Play Store and App Store.
  • Enable the Wi-Fi option on your device.
  • Look for your D-link router’s network and select it.
  • Once the device is connected to the network, open the QRS Mobile app.
  • Tap Start on the welcome screen of the application.
  • Perform the on-screen instructions to complete the setup process.
  • If you wish to receive a notification when a new firmware update is available, then select the Notify me when new firmware is an available option when prompted.
  • After completing the router setup, tap Save.

Congratulations! You have successfully configured your D-Link router.

Using The Setup Wizard

  • On your computer, open a web browser.
  • Type the IP address or https://dlinkrouter.local./
  • Click the Next button in the Welcome window.
  • Choose the desired connection type, PPPoE, DNS settings, and other preferences.
  • After completing the setup, click the Finish button.

Congratulations! The D-Link EXO AC1900 router setup is done successfully.

Related Articles

Top z