On this web page, we will show you some configuration settings required for a Dlink router. Firstly, ensure that you have completed the router’s hardware setup properly. Check if the computer that you are using to configure the router is connected to the D-Link router’s network. If not, connect it by following the instructions given below the D Link router configuration settings.
Establishing the connection:
Turn your D-Link router ON.
You can either choose the wired or wireless method to connect your computer to the router.
If you are using the wired method, then connect the router to the computer directly using an Ethernet cable.
If not, keep your computer near to the router.
Click the Network icon available on the taskbar.
Select your D-Link router’s SSID.
Enter the network security key.
Click the Connect button.
Configuring Router Settings:
From your computer’s web browser, go to the router’s web access page using valid credentials.
Once you have reached your router’s web access page, click the Run Wizard or Next button.
Now, the router selects the default settings.
Follow these steps on the D Link router configuration settings.
If prompted, configure the router settings of your desire.
Make sure to select the Connection Type correctly when prompted.
If required, change the network’s name (SSID) and password.
Select your time zone correctly.
Once you have configured the router settings correctly, click the Save button.
Configuration of D-Link DIR-825:
Check if your PC is connected to the D-Link DIR-825 router’s network.
Open a web browser on your computer and type 192.168.0.1 in the address bar.
Enter your router’s login credentials correctly when prompted.
As soon as you sign in, a dialog box titled MANUAL INTERNET CONNECTION OPTIONS will open.
Click the Manual Internet Connection Setup button on the dialog box.
Enter the following OpenDNS address in the Primary DNS Server and Secondary DNS Server fields.
After configuring the router settings, click the Save Settings button.
Contact us if you need remote assistance on the D Link router configuration settings.