How To Install Linksys Wifi Extender

To install the Linksys wifi extender, the router permits you to extend the wireless signal for the access point or router to extend the Internet connectivity using a wired or wireless connection. Get the router’s settings such as network name and password. You need to reset the range extender. Long-press the Reset button present on the panel of the extender. Wait until the LED starts flickering to restore the factory settings. Go through the steps below to establish the connection for how to install Linksys wifi extender.

10 Steps To Install Linksys Wifi Extender

  1. Link the computer to the Ethernet port of the range extender using an Ethernet cable.
  2. Connect the range extender to the power outlet. Ensure that the LED light is stable.
  3. Open the web browser and type the router’s IP address in the Address bar.
  4. A window displays asking for a username and password.Leave the user name blank and type admin in the Password field. Select the Log in option.
  5. Select Wireless and click the Basic Wireless Settings option.
  6. Assign the radio button to Manual and type the router’s Network name.
  7. Choose the security settings is similar to that on the wireless security section.
  8. Type the passphrase or WEP Key on the search bar and select Save Settings.
  9. Detach the power cable from the router and the range extender for 30 seconds.
  10. Refrain from proceeding until the lights are stable and then insert the range extender.
how to install linksys wifi extender

How Does The Linksys WiFi Extender Work?

Wi-Fi extender is a device that is used to repeat the wireless signal from the router to broaden its coverage area. It acts as a device that receives the Wi-Fi signal from the router and broadcasts it to the locations where there is minimum signal strength.

  • Set up the Range extender and know how to install Linksys wifi extender
  • Locate the PUSH button on the extender.
  • Press the button to connect the extender to the router.
  • Make use of the Spot Finder to place the device properly.
  • After a while, connect it to the expanded home Wi-Fi network.

Web-Based Setup Page For Linksys Wifi Extender

  • Open the web browser and access the setup page of the extender. Type http://RE6x00-xxx for the Windows OS or http://RE6x00-xxx.local for the Mac operating system.
  • Xxx implies the last three characters of the extender’s Mac address. Select the Start button on your Windows system. Choose the File Explorer. Find the Network button on the screen and click on it.
  • See the device webpage by choosing the range extender symbol. A pop-up screen displays the user name and password. Type admin in both search boxes. You can change the password if required.
  • Access the web-based setup page. After setting up the page, click the Administration option and select Factory Settings.
  • Reset the factory settings to finish the configuration and the process of how to install Linksys wifi extender. Detach the Linksys extender and turn it off for a next few seconds.

How To Use Range Extender Settings

Choose the Help option on the right side of the screen for obtaining additional information. Modify the Settings and then click the Save option at the bottom of the screen to store all the settings. Choose the Cancel option to delete the settings.

linksys range extender settings

How To Configure The Linksys RE6700 To Range Extender Mode

Configuring the Wi-Fi Range Extender is an easy task with its Browser Setup feature. You need to use a setup CD to install the software. Gather the network name and password. Plug the router to a power outlet. Refrain from proceeding until the light is blinking orange before start the process of how to install Linksys wifi extender.

  • Plug in the range extender via a system or mobile.
  • Launch the web browser and type the IP address in the browser’s URL bar.
  • Select the Start Setup option. Locate the As a wireless range extender option on the screen and click on it. Click the Next option.
  • Choose the Wi-Fi icon. Set the router’s frequency band to 2.4GHz.
  • Select the Manually Enter Network name and Password if it detects the Wi-Fi.
  • Type the password in the field and select the Next option.
  • The system prompts you to set up the extended wireless network. Change the settings and select the Next option.
  • Click the Next option if the Spot Finder prompts you the router location. It helps to determine the signal strength between the extender and the router.
  • If the extender is too far or close, try to arrange it accordingly. Type the admin password to secure the router. Select the Save option. You can easily change the wireless settings if required.
configure linksys re6700 range extender

How To Configure The Linksys RE6500 Ac1200 Dual Band Wireless Range Extender

There are mainly two methods to configure the extender using the Embedded Setup Wizard or the Wi-Fi Protected Setup button of the router. Learn how to install Linksys wifi extender.

  • Collect the Wi-Fi name and password.
  • Attach the antennas to the device and the power adapter to a power outlet.
  • Try to position the devices upright for easy use. Keep the range extender in the between your router and area.
  • Get at least 50% Wi-Fi signal from the router. Refrain from proceeding until a stable light displays on the top panel of the extender.
  • Try to connect the new device to the range extender via a computer or mobile device. Push the Reset button by resetting the range extender.
  • For a Wired Setup, link the extender to the system via an Ethernet cable. Ensure that the system is not connected to Wi-Fi.
  • Open the browser and type the IP address in the Address bar. If the address is not proper, find it in the router’s DHCP table.
  • Select the Start button. Tick the box next to I Agree on the License Agreement. Choose the network name if prompted.
  • Rescanning the network name can be carried out by clicking the Refresh icon
  • If you are unable to find the Wi-Fi network, select the Manually Enter Network name and Password option.
  • Refrain from proceeding until it displays on the Wi-Fi and choose the network. Check if the Spot Finder page shows on the screen.
  • This feature detects the signal strength between your range extender and router.
  • If the range is too far, detach and move it close to the router. Select the Connect Anyway option.
  • Type the Wi-Fi password and select the Next option. Configure the Extended Network option if prompted.
  • You need to modify the Extended Network name and select Next for the other modifications. Use the administrator’s password. After the extender is set up, check the internet connection.

Configure The Linksys RE4600 To Range Extender Mode

Get the details of how to install Linksys wifi extender and for the extender using the existing and active Wireless network. Gather the network name and password. The credentials are case-sensitive. It is necessary to position the extender within the range of the router’s Wi-Fi. Check if the device is connected to a power source and wait until the light is on top of the extender to be active. During the initial setup, connect the extender to a router. Configure it up in the same room as the router and then connect the extender. Position in the desired location.

  • Establish the Wi-Fi network name of the extender on a computer or tablet. Open the web browser on the system and access the web-based setup page in the address bar. After the screen appears, select the Start option.
  • Click the I agree option in the License Agreement screen. Choose the network name. Detect the network name from the available list.
  • Click the Finish option to complete the process of how to install Linksys wifi extender.
configure linksys re4600 ranger extender

How To Setup The Wireless Extender With The Help Of Setup CD

  • Setting up the extender is easy. Download the software or firmware of the device. Before starting the setup process, set the router to 2.4GHz.
  • The extender operates at 2.4 GHz. Gather the network name and password to set up the network connection.
  • Load the CD into the optional drive. Wait for the AutoPlay window to appear on the screen. Select the Set up your Linksys Range Extender option.
  • Agree to the Terms and Conditions mentioned on the screen and click Next to proceed with the installation.
  • Configure the wireless connection on the router and range extender after the software prepares.
  • Go through the instructions mentioned on the screen and click Next to proceed.
  • Insert the range extender into a power outlet after the wireless connection gets detected and select the Next option.
  • After the software configures, find the range extender, and try to connect to the wireless network.
  • If the software can detect, choose the network name. Choose the name and select the Connect option.
  • Find the Wireless network name on the router and click on it. You need to click the Next option. Type the password or security key and click OK.
  • Configure the range extender. If you wish to transfer the range extender to a different location, go through the instructions provided in the setup screen.
  • Select the Next option. Choose Close to terminate the process of how to install Linksys wifi extender.
  • Verify the wireless network connection and the wireless extender’s name on the screen.
  • Check if the extender is connected to the router.

Factory Default Setting

If you are facing any difficulty in configuring the range extenders, perform the factory reset. This must be performed if the extender encounters the following issues.

  • Intermittent connection with the extender.
  • Unable to install the range extender using the software.
  • Impossible to access the setup of the range extender.
  • An LED light on the router is not blinking.
  • Create a backup of your extender device configuration and restore it to prevent configuration issues.
  • Open the web page of the router. Select the Management tab and choose Backup Configuration. Store all the settings if required.
  • Long-press the Range Extender button for a few seconds and wait until it is reset.

Orange Light Blinking On My Linksys

The extender contains an orange light located on the front of the device which indicates that the power is ON. A blinking Orange light implies that the router is malfunctioning. The solutions to resolve the issue are given below.

  • Reboot the device to resolve the issue. This is carried out by detaching the power cable from the printer’s rear.
  • Refrain from proceeding for a while and then replug it to the power connector.
  • If the orange light flickers, it is necessary to upgrade the firmware.
  • Download the new firmware.
  • Unplug the device from the Internet connection
  • Connect the machine to the Internet.
  • Try to connect your system to the Internet.
  • After downloading the updates, launch the file, and go through the instructions to update the device’s firmware.
  • After updating, turn on the device. For more guidance regarding how to install Linksys wifi extender, contact our tech experts.

Related Articles

Top z