How To Setup A Wifi Extender Linksys

To setup Linksys wifi extender, the Linksys Wireless Range Extender allows you to extend the wireless signal of any Wi-Fi router or access point. When it is hard for the Wi-Fi signal to reach every corner of the building, you can use the Linksys Wi-Fi extender. It takes the existing signal from the wireless access point and rebroadcasts it to create a new second network. The wireless range extenders are compatible with the 802.11 protocols. When you have a Wi-Fi router and the signal is not reaching to some of the areas, you can use the Wi-Fi extender. The area which does not get the router signals is termed as Dead spots. To get signal even in Dead spots, you can configure a Wi-Fi extender at the midpoint location. The Linksys Wi-Fi extender can be used at home, organizations, and Government network stations. Read more to know how to setup a wifi extender Linksys.

Before You Begin With The Setup Procedure, Make Sure That You’ve Done The Following Requirements.

  • Note the router network’s wireless settings such as:
    • Wireless network name (SSID)
    • Wireless password or network security key
  • Reset the range extender - Press and hold the Reset button situated at the top panel of the extender until the LED starts blinking to restore its factory settings.
  • Step 1: Use an Ethernet cable and connect the extender and computer. Make sure that you have connected securely into the Ethernet port.
  • Step 2: Connect your range extender to the power supply and ensure that the LED lights are glowing.
  • Step 3: Start a web browser on your computer and type your router's IP Address.
  • Step 4: Now a prompt window will appear on the screen asking for a username and passkey. Leave the Username field empty and enter ‘admin’ in the Password field. Now, click Sign In.
  • Step 5: Click Wireless and select Basic Wireless Settings.
  • Step 6: Assign the radio button to manual and then type your router’s Network name.
  • Step 7: Go to the Wireless Security section and click the security settings that match your router’s configuration. Type your security key and then click Save Settings.
  • Step 8: Detach the power cords from the router and the range extender for 30 seconds. Plug in the router cord first. Wait until the cables are stable and then connect the range extender. Your range extender and router should now be in synchronized condition.

In order to affirm that your extender is successfully installed, access your router’s DHCP table and inspect if the range extender is enlisted there with its IP Address. Follow detailed guide for how to setup a wifi extender Linksys.

How To Reset The Linksys Range Extender

  • Resetting the Linksys range extender will restore its factory default settings.
  • You need to do this if you confront either of the following scenarios.
  • If you are experiencing intermittent connections while using the Linksys range extender.
  • If you are not able to access the web-based setup page of the Linksys range extender.
  • The range extender’s light is not stable or blinking after making a power cycle.
  • Before resetting the range extender, it is better to create a backup of the device’s configuration settings.
  • Doing so, you can restore them quickly without going through all the configuration process again.

Follow the guidelines suggested below to learn how to setup a wifi extender Linksys.

  • Step 1: Access the web-based setup page and under the Management tab, click the Backup Configurations button and then select Save Settings.
  • Step 2: Before proceeding to the next steps, make sure that your device is powered ON. There are two ways to reset the range extender to factory default settings.

In some Linksys Wi-Fi extenders, you will find a Reset button. But the location of the Reset button will vary according to the range extender’s model. Now, press and hold the Linksys range extender’s Reset button for 10 seconds. After some time, power On the device. The factory defaults will be restored on your range extender.

Resetting Through The Web-Based Setup Page

  • On your computer, go to a browser and access the Linksys setup page.
  • Go to the Administration tab and select Factory Defaults.
  • Click the Restore Factory Defaults option.
  • To complete the Reset process, power off the device and wait for some time. Now, power on the device.

How To Find The Extender WiFi Network Password ?

  • Connect your computer to the Wi-Fi range Extender using Ethernet or wireless connection.
  • Open a web browser on your computer and go to the manufacturer’s site.
  • Sign in to your account using the Username and Password.
  • Click Settings and then select Wireless.
  • View the General tab and search for Wi-Fi password.
  • If it says Same as existing network password, then it is using the same Wi-Fi password.
  • If it says Use a different password, it will be displayed under the Security Type.

How To Use A Linksys WiFi Extender ?

Linksys Wi-Fi extender allows you to access Wi-Fi from any distant location from the access point. Learn how to setup a wifi extender Linksys Wi-Fi extender. It is a simple and quick process, as it doesn’t require any installation software or setup CD-ROM. Before you start with the setup process, ensure that the Wi-Fi router is in the ready state and note down the Wi-Fi password.

  • Plug the Linksys Wi-Fi Extender into a power supply and wait until the orange light is blinking.
  • On your computer, open a search engine and go to the manufacturer’s site.
  • Click Start Setup and a As a wireless range extender option will be selected by default.
  • Click Next and select your Wi-Fi connection.
  • Type your Wi-Fi password in the required field and click Next.
  • You will be prompted to configure the range extender.
  • Select Next and make sure that the range extender is in the Just Right position.
  • If it indicates Too Far or Too close, then relocate the Linksys extender.
  • Create an admin password and secure your Linksys extender.
  • Now, the Linksys Wi-Fi extender will be successfully installed.
how to setup a wifi extender linksys

How To Access The Web-Based Linksys Range Extender Setup Page

To set up the Linksys range extender, access the web-based setup page from your computer. Based on your computer’s operating system, follow the guidelines given below for how to setup a wifi extender Linksys.

For Windows 10

  • Click the Start menu and select the File Explorer.
  • Select Network from the left panel and right-click your range extender’s icon.
  • Select View Device Webpage and you will be directed to the Linksys range extender’s web-based setup page.
  • Type ‘admin’ as password and leave the Username field blank.
  • Click Login and now the web-based setup page of your Linksys range extender will be displayed.

For Windows 8

  • Open the Charms bar and click Search.
  • In the Search field, type Network and then click Network app.
  • Right-click on your Linksys extender’s icon and select Properties.
  • Note your range extender’s IP address.
  • Open a web browser and enter your Linksys Range Extender’s IP address in the Address bar.
  • Type the Username and Password in the respective boxes.
  • Click Login to view the setup page.

For Mac OS

  • Open the Safari web browser and select the Bookmarks tab.
  • Click Bonjour and look for your range extender from the list of options.
  • A screen will prompt for a Name and a Password.
  • Enter the name and password.
  • Click Login to access the Linksys extender setup page.

How To Connect Linksys Extender And Computer ?

Before you access the setup page for the Linksys Range Extender, connect it to the computer. Learn how to setup a wifi extender Linksys to computer below.

  • Power on the Linksys Extender and your computer.
  • Use a wireless connection or an Ethernet cable to connect Extender Linksys.
  • If you want to use a wired connection, connect one end of the Ethernet cable into the extender.
  • Attach another terminal into the computer.
  • If you want to use a wireless connection, click the Network icon on your computer.
  • Choose your Wi-Fi network and click the Connect option.

Now, your computer and the Linksys Wi-Fi Extender are connected successfully.

connect linksys extender to computer

Some Common Issues

Cannot Connect To Linksys Extender

One of the most common issues faced while using the Linksys extender is that users find it difficult while connecting to the extender. If you want to fix this issue, let’s have a quick check on the following requirements for how to setup a wifi extender Linksys.

  • The Linksys Extender should be positioned in an optimal location. During the Linksys setup, place the extender on a clean area. Make sure that there is a wall socket nearby so that it will be accessible to power on the Linksys extender. Once you have connected, try to access the web-based setup page.
  • Some objects can create interference in the path of the extender signals. Objects like electronic appliances, radio, and microwave oven can interfere with the Linksys Extender.
  • Unplug the Linksys extender and wait for some time. Now, reconnect the extender. This mechanism is known as rebooting.
  • Another reason for the Linksys Extender not connecting is that Wi-Fi coverage might be improper. Try to rule out this problem by changing the position of the range extender’s antennas. It is generally recommended to place the antennas either vertically or horizontally.

Unable To Sign In To The Linksys Wireless Range Extenders Web-Based Setup Page

Accessing the Linksys Range Extender’s web-based setup page can facilitate you to configure your advanced settings. Follow the guidelines given below if you are facing problem in accessing the setup page.

  • Check whether your computer is connected to the range extender’s Wi-Fi. To check the connection, click on your computer’s Wireless Utility and it will show the SSID to which your computer is connected.
  • If your computer is not connected, choose your wireless network and enter the password. Once connected, you can access the setup page.
  • You can check the status of the extender by viewing the indicator light.
  • Disconnect the power cable of the extender from the power supply. Wait for some time and re-connect the power cable.
  • A Ping Test can find out the communication between the computer and the range extender.
  • If all the above instructions did not work out, proceed to reset the device. Restore the factory defaults and try to access the setup page.
  • To reset your range extender, press and hold the Reset button for 10 seconds.
  • Wait until the LED lights start blinking. The factory defaults will be restored on your Linksys Range Extender.

After restoring the factory default settings, you may now try accessing the Linksys range extender’s web-based setup page. If the problem persists for how to setup a wifi extender Linksys, disable your computer’s proxy settings.

Related Articles

Top z