setup router

How To Use TP Link Wifi Range Extender

To start using the TP-Link Wi-Fi Range Extender, identify the router’s IP address, the Service Set Identifier, the type of Encryption, and the Password to access the network. Log in to your router using the details mentioned above for how to use TP Link wifi range extender. Now, connect the TP-Link Extender to the PC using an Ethernet Cable. Enter the manufacturer’s Official Site on your web browser. Select your Wireless Network and specify the Password. Choose the range of the TP-Link Wi-Fi Extender. Select the Copy From Main Router option for a single Wireless Network. For a different network, select the Customize option. The TP-Link extender will allow access to the internet after Rebooting.

How To Use TP Link Pocket Wifi

Go through these steps to get to know how to use TP Link wifi range extender pocket version.

  • Download the Tether application on your Android or iPhone.
  • Make sure that the app is compatible with your smartphone.
  • Navigate to the Settings section on your device and select the Wireless option.
  • Search for the name of your Router’s Wireless Network and click on it.
  • Launch the Tether app and locate the Local Devices section.
  • Select the icon of your Router. The image may vary depending on the router.
  • Enter the default Login Credentials which is printed on the label located at the bottom of the router. The app launches the Quick Setup tab automatically.
  • Verify your ISP to make a selection on the Type of your Internet Connection and click the Next button.
  • If needed, change the Network Name and Password of your Router, and then select the Next button.
  • Repeat the same process for each desired band and click the Save button to complete the configuration process.
how to use TP Link wifi range extender

How To Configure My Range Extender Via WPS Button ?

  • Connect the Power Adapter of your Range Extender to an Electric Socket.
  • Press the WPS button located at the back of the Main Router.
  • Wait until the WPS LED blinks. If not, push the button again.
  • Push the WPS button on the TP-Link Extender.
  • The WPS light takes some time to blink.
  • Press the button again if the light isn’t on.
  • If the extender doesn’t blink, it indicates a failure of the WPS process.
  • Repeat the process, until the light blinks.
  • The connection is successful when the LED on the Extender continues to blink.
  • Place the Range Extender in an appropriate place where you want to extend the wireless network’s coverage.

How To Use TP Link Wifi Router As Wifi Receiver ?

Use an Ethernet Cable to connect the PC to the second LAN Port on your TP-Link Router and Visit the manufacturer’s website using the IP address mentioned on the label at the bottom of your router.

  • Choose the LAN option under Network Settings.
  • Specify the IP address of your router in such a way that it is outside the primary router’s DHCP range.
  • Click the Wireless option -> Wireless Settings. Enter the SSID and click the Save button.
  • Navigate to the Wireless option -> Wireless Security.
  • Choose the WPA/WPA2-Personal Wireless Security option.
  • Select the Disable the DHCP Server option in DHCP Settings.
  • Enable the Reboot option from System Tools.
  • Connect the main router and your TP-Link router via an Ethernet Cable.
  • All the LAN ports on the TP-Link router will now grant access to the Internet.
  • Any Wi-Fi device can access the Internet through your TP-Link Router.

How To Use TP Link Router As Range Extender ?

  • For how to use TP Link wifi range extender, you can set up a spare router as a repeater to extend your Wi-Fi Network. Determine the address of the primary router in the Network’s section of your PC. Mention the IP address on the web browser and enter the default login credentials in the admin page.
  • The router’s configuration screen appears. Locate the Router’s Settings section. Check your Wi-Fi’s Settings and note the Security Type for later use.
  • Reset the second router by holding the Reset button present at the back of the device. Disconnect the main router and connect the spare one to your PC. Configure the Second router using the details of the primary router.
  • The Wireless Network Name, Channel Number, and the Security type should match the details of the Primary Router. Navigate to the LAN Setup page and specify the IP Address in the same range of the primary router but outside of the range assigned by the DHCP. Disable the DHCP option while you enter the IP address manually. Click the Save button, and the Rebooting process begins. Type the new IP address in the browser’s address field.
  • Connect the two routers via a Powerline Networking Adapters or Wireless. With both the devices turned on, check the signal strength on your PC or Mobile phone. The range of your wireless network will have a new extended reach.

How To Reset TP Link Extender ?

Resetting the TP-Link Extender will erase all the data on your Router. It automatically goes to the default mode, and hence the Configuration has to be set once again to start using the Router. The process of resetting the TP-Link Extender is useful when you forget the Login Credentials and during Troubleshooting to clear any existing Settings and Properties.

Follow the below mentioned steps to reset the TP-Link Extender.

  • Verify that the TP-Link Extender is turned on.
  • If not, connect it to an Electrical Source.
  • Check for the Reset button on the back of the Extender.
  • Use a pin or a straightened-out paper clip to press the Reset button.
  • Hold the button for about 10 seconds and release it.
  • The Extender will take some time to complete the Reset.
  • The WLAN light on the Extender stops blinking thereby indicating the completion of the Reset Process.
  • The TP-Link Extender modifies to the Factory Default Settings.

Issue With Using A TP Link Wifi Range Extender

  • When using a TP-Link router, many issues might occur. There might be errors before configuration, after configuration, issues related to LED lights, etc. The solutions to solve the issues of how to use TP Link wifi range extender are given on this website.
  • Problems during configuration:
  • If you are not able to login to the web access page, then make use of the following TP Link solutions to sort it out. To resolve this, connect the device to the extender directly. Use a cable to associate the device and the Wi-Fi extender.
  • Reset the local DNS cache in accordance with your operating system with the help of the command prompt. Type ipconfig/flushdns command in the window and press the Enter button. Your cache will now be cleared.
  • Problems after the configuration:
  • If any problems occur after the installation of the extender, then follow the steps given here to rectify the issue. Set a Static IP address if the device is not able to obtain the IP address automatically.
  • Check if the static IP address keyed in is wrong. Issues might occur if your device is set up using a different IP address. Enable the Obtain IP Address Automatically option to acquire the correct IP address. Else, update the driver of the wireless adapter connected to the device to sort out such problems.
  • Verify if there is any interference present near the router. Objects made of metal, electronic devices, etc., can cause interference if they are present on the top or somewhere near the router
  • The extender should be placed at a proper distance from the router. Only then, the signal will reach all the devices. To calculate the distance between the router and the dead zone, place the extender at the midpoint on the these two. Connect your device from the dead zone and try accessing the Internet. If you can connect to the Internet, then you have placed the extender properly. Else, change the position of the Wi-Fi extender if you are not able to associate with the TP-Link router from the dead zone. Find below the more information regarding how to use TP Link wifi range extender.

How To Block Someone Using My Wifi TP Link

  • Blocking a user can be done using two methods. Make use of any one of the methods to block anyone you want.
  • Tun on your computer and launch a web browser that you use frequently. Go to the search bar, type the IP address of the router and hit the Enter button.
  • Specify the Username and Password in the next prompt that appears.
  • Select the Wireless tab, and a list of options will be displayed under it.
  • Choose the MAC Filter option from the Wireless Menu.
  • Tap the Add option to enable MAC Filtering. In the next window, type the MAC Address in the field provided.
  • The MAC address is a combination of numbers and letters.
  • Click the Apply/Save button after entering the Mac address. Select the Allow option under the MAC Restrict Mode option.
  • On carrying out these steps, you would have successfully activated MAC Filtering.
how to block someone using my wifi tp link

How To Know Who Is Using My Wifi TP Link


  • Open your browser and key in the IP address of the TP-Link router.
  • Enter the User name and Password in the next window that appears.
  • Select the Wireless tab from the left side of the navigational pane.
  • Under that tab, select the Devices option to check the list of devices connected to the router.
  • If you want to block any device, you can do so.


  • The next method is to scan your network to obtain the list of IP address that is connected to the router.
  • Download any third party app that can scan the network. It will give you the list of devices associated with the router and more information about it.
  • The app will let you know if the device connected to your router is valid or not.
  • Install the application on your device and start scanning. In the next window, the device associated with your router will be displayed.

How To Chagne TP Link Wifi Password Using Mobile

  • In the initial step, make sure your device is connected to the Internet. You can access the router page only if you are connected to the Internet.
  • In case you do not have an Internet connection, set one up, and then proceed with the process.
  • Open the Browser on your mobile. You are advised to use Google Chrome for carrying out this process.
  • Go to the Search bar, enter the IP address of the router there. The default address is or Most of the TP-Link routers usually have as the IP address.
  • In the next prompt that appears, you have to enter the username and password to enter into the web access page.
  • The default username and password are Admin. If you have changed it, specify the password you set.
  • Select the Wireless tab and choose the Wireless Security option under it.
  • Choose the Security Type and enter the new password in the PSK Passphrase.
  • Click the Save button to save the new password. For more ragarding how to use TP Link wifi range extender, get connect with our techies.

Related Articles

Top z