How To Fix Linksys Wireless Router Problems Connecting?

Most of the people today are more reliant on the Wi-Fi routers that enable high-quality network speeds and best browsing experience. The Linksys routers are one of those devices that can fulfill all your networking needs.

The Linksys wireless routers give out a good Wi-Fi speed, unique coverage area, better wireless standards, and also offer better security features. However, some of the Linksys router users have complained regarding the Wi-Fi signal of the router. Certain minor issues could be preventing the router signal from not showing. We have some quick set of steps that can help you fix the Linksys wireless router problems connecting.

Basic Troubleshooting:

  • Check the connection between your router and the modem.
  • Disconnect all the cables connected to the router, including the connection to the modem.
  • Turn off both the router and the modem.
  • Now, connect an Ethernet cable between the modem and the Internet port of the router.
  • Turn on the modem first.
  • Once the modem is ready, turn on the router.
Linksys Wireless Router Problems Connecting

If you still face connection issues on your Linksys wireless router, then carry out the methods given here.

Method 1: Enable SSID Broadcast

  • Check if the lights on your Linksys router are lit, especially the Wi-Fi light should be lit.
  • If you still cannot find the connection, then SSID broadcast might have been disabled.
  • Follow the steps to enable SSID broadcast on your Linksys router.
  • Open the default browser on your Windows computer.
  • You will now have to enter the Linksys router’s IP address in the address bar and press the Enter button.
  • On the login page, enter the default login credentials to gain access to the Linksys router page.

The default login credentials are:

  • Username: admin
  • Password: admin
  • Navigate directly to Wireless > Basic Wireless Settings.
  • Next to the Wireless SSID Broadcast option, click the Enable radio button.
  • Save Changes and close the router configuration window.
  • Make sure the router is installed within the proximity of the computer to have a strong wireless signal.

Method 2: Configure The Wireless Settings

  • Open the default browser on your computer and navigate to the router’s setup page.
  • Once you log in to the router page, you can make the necessary changes to resolve the Linksys Wireless Router Problems Connecting.
  • Change the network name and the password in the Wireless section. Save the changes and restart the router to see if the error is resolved.

Method 3: Placement Of The Router

  • The placement of the router can always be one of the major causes when it comes to signal dropping. Make sure to place the router at the center of your home, avoid placing the router next to walls or glass objects that could block the signals.
  • Keep the router away from electronic devices like microwaves, TV, and radio because the router signals can be interrupted.
  • Keep the Linksys router closer to the computer to achieve full connection.
  • You will see the full connection achieved when you see the Wi-Fi bars full.

Method 4: Change The Wireless Channel

  • Interference with other wireless devices can cause a massive conflict.
  • The devices that are using the same frequency can come in interference with the Linksys router signals.
  • You can either relocate your router or change the wireless channel on the router settings page as mentioned in the following steps.
  • Enter the Linksys router IP address in the address bar of a browser and press the Enter button.
  • Also, enter the default login credentials when prompted.
  • The Linksys page will open, click Wireless and select Channel and SSID.
  • In the wireless channel drop-down list, select the channel 1-13 and click the Apply Changes button.

Method 5: Reset The Router & Upgrade Firmware

If you face sudden power interruptions, it can also cause the Linksys router to drop signals. When you get the power back on, turn off the power source of the router, remove the plug, and wait for a couple of minutes to insert it back to the power source.

If you are still facing Linksys Wireless Router Problems Connecting problems, you have two options to resolve:

Reset the router:

  • Log in to the Linksys router page.
  • Click the following options: Administration > Factory Defaults > Restore Factory Defaults.
  • The Linksys router will be reset. Again, set up the router from scratch.

Upgrade router firmware:

  • Initially, download and save the firmware file on your computer using a web browser.
  • Now, enter the Linksys router IP address in the address bar.
  • Enter the default router login credentials (Located at the back of the router).
  • Choose Administration followed by Firmware Upgrade.
  • Click the Browse button and select the downloaded firmware file.
  • Click Start Upgrade and continue with the on-screen instructions to complete the process.
  • Once the upgrade is complete, wait for a few seconds and then reboot the computer.
  • Follow the above steps to fix Linksys wireless router problems connecting.
Top z