Linksys Wrt54g Router Setup - Complete Guide

Linksys WRT54G is a three-in-one router that acts as a router, wireless access point, and a built-in 4-port full-duplex 10/100 switch. This router also functions as a DHCP server that protects your computer and network from all kinds of internet attacks. It can support up to 253 IP addresses. The default IP address of this Linksys router is The hardware and web-based configuration for the router are quite simple and easy to perform.The below section explains how to perform the Linksys WRT54G router setup for the first time.

Step 1: Hardware setup

Connecting a modem to your router

 Linksys Wrt54g Router setup

  • Get an Ethernet cable.
  • Now, plug the cable into your modem.
  • Insert the other end of the same Ethernet cable to your Linksys router.
  • Make sure to connect the cable to the Internet port of your router.
  • Check whether the cable is connected securely and continue with the remaining instructions given below.

Connecting the router to your computer

  • Get another Ethernet cable.
  • Move your router closer to the computer.
  • Plug the Ethernet cable to one of the ports labeled 1, 2, 3, or 4 on your router.
  • Connect the other end of the cable to your computer.
  • Make sure that the cable is connected securely.

Connecting the power cables

  • Connect the power cables of your router, modem, and computer to the wall outlet.
  • Turn on the devices one-by-one.
  • Wait for the devices to become stable.
  • Once the Internet light on your router stops blinking, begin the web-based configuration.
  • If the light continues to blink or the light doesn’t blink, then re-perform the hardware setup.

Congratulations! You have successfully completed the first part of the Linksys WRT54G router setup.

Step 2: Web-based configuration

To complete the Linksys router setup, access its web-access page and configure the SSID and password.

Sign in to your router’s web access page

  • On your computer, open the web browser and type the Linksys router’s default IP address.
  • In the Login window, type the default credentials of your router.
  • Click the Sign-in button.
  • If an error occurs while signing into the router’s web page, then recheck the IP address and the credentials.
  • Make sure that the Ethernet cable between the router and your computer is connected securely.

Configuring the Wi-Fi network settings

  • On your Linksys WRT54G router’s web access page, click on the Wireless tab.
  • Go to the Basic Wireless Settings option.
  • Choose the SSID for your wireless network and type it in the Wireless Network Name field.
  • Make sure that the Wireless SSID Broadcast option is enabled.
  • Click on the Save Settings button followed by Continue.

Setting up the wireless security

  • Go to the Wireless tab on the router’s main interface.
  • Click on the Wireless Security sub-tab.
  • Set the Security mode as WPA2 Personal.
  • In the field labeled WPA Shared Key, type the password of your desire.
  • Click the Save Settings button.

Congratulations! You have successfully completed the Linksys WRT54G router setup.

Related Articles

Top z