How To Perform The Linksys WRT54GC Router Setup?

Linksys WRT54GC is a compact yet affordable router with easy setup steps. If you're going to perform the Linksys WRT54GC router setup for the first time, then follow the instructions given on this page.


 Linksys WRT54GC Router Setup

  • Power adapter
  • Ethernet cable
  • Reading material
  • Place the router in a centralized area and position the antenna.
  • Now, turn off your computer and modem. If your modem carries any backup battery, remove it as well.
  • Use the Ethernet cable that came along with the package to connect the modem and the Linksys router.
  • At the same time, connect the computer and the router using another Ethernet cable.
  • Connect the power adapter to the AC power socket on the router and plug the other end into a wall outlet.
  • Turn ON your modem, Linksys router, and computer.
  • It's time to configure the router from your computer. Open a web browser and type in your router's IP address in the address bar.
  • You'll be taken to the router's login page. Enter the default login credentials in their respective fields and click on the OK button to confirm the details you have entered.
  • You can check on the router's label to identify the default credentials.
  • By default, the router's Internet Connection Type is set to Automatic Configuration – DHCP. You can alter the connection type for the router.
  • Next, to set up the wireless network for your Linksys WRT54GC router, go to the Wireless tab.
  • Under Basic Wireless Settings, make sure to choose the Manual radio button.
  • Choose the Mode for your wireless network. It can be Mixed, Wireless G-only, or Wireless B-only.
  • Now, enter the SSID and Password for your router’s wireless network in the respective fields.
  • In the Wireless SSID Broadcast field, choose the Enabled radio button.
  • Finally, click on the Save Settings button to complete the Linksys WRT54GC router setup.

Related Articles

Top z