How To Perform The Linksys WRT54GL v1 Router Setup?

Linksys WRT54GL v1 is a Linux-based Wireless-G router with open-source firmware that allows you to customize your device. This router provides the functionality of three network devices in one. Keep reading the instructions below to know more about the Linksys WRT54GL v1 router setup.

Steps To Setup

 Linksys WRT54GL v1 Router Setup

  • Before starting, verify that you have a stable Internet connection from your DSL modem. To check that, connect your computer directly to the modem via an Ethernet cable.
  • After ensuring that your modem is ready to use, turn it off and unplug all the cables connected to it.
  • Next, unpack your router and connect its WAN port to the modem using the supplied Ethernet cable.
  • Connect your computer’s Ethernet port to the router’s LAN port using another Ethernet cable.
  • Now, turn on your modem after connecting its power cord to an electrical outlet.
  • Also, connect your router to an electrical outlet using the supplied power cord.
  • After ensuring that the LEDs on your router are lit, move on to your computer.
  • The setup on the web-based utility begins now.
  • Exit all the running apps on your computer and launch the default browser.
  • Enter your router’s IP address in the URL field and hit the Enter key to access the web-based utility.
  • You can identify the IP address of your router from its label.
  • If prompted, enter ‘admin’ in the Username and Password fields and click the OK button.
  • On the Basic Setup screen, click the Setup tab and go to the Internet Setup section.
  • Choose one of the following options as your Internet connection type from the drop-down menu.
  • Automatic Configuration -DHCP
  • Static IP
  • PPPoE
  • PPTP
  • L2TP
  • Telstra Cable
  • If your Internet connection type is PPPoE, enter the login details provided by your ISP.
  • To secure your Wi-Fi network, go to the Wireless tab and click the Wireless Security submenu.
  • Choose your security mode and enter the WPS Shared key.
  • Next, change the wireless settings such as SSID and network key to prevent unauthorized access to your wireless network.
  • After configuring the required router settings, click Save Settings.
  • You will be logged out from the web-based utility.
  • Enter the newly created security key to access the router’s settings page.
  • You have now seen the procedure for the Linksys WRT54GL v1 router setup.

Related Articles

Top z