Linksys Wrt54gr Router Setup - Complete Guide

Linksys WRT54GR is a Wireless-G Broadband router that provides seamless network connectivity and high-speed connections for the devices connecting to it. Keep reading the instructions below to know more about the Linksys WRT54GR router setup.

 Linksys Wrt54gr Router Setup

  • First, turn off your DSL modem (if you have already turned it on) and unplug its power adapter from the electrical source.
  • Next, place the router in your workplace and align the antennas to a 45-degree angle.
  • Connect the router’s WAN port (Internet port) and the modem using the supplied Ethernet cable.
  • Using another Ethernet cable, connect the computer to your router’s LAN port.
  • Plug the power adapter of your modem and the router into the wall outlets.
  • Turn on the modem and then the router.
  • Now, the hardware setup is complete. Continue reading the steps to complete the Linksys router setup on the web GUI.
  • If this is a first-time setup, use the supplied CD-ROM and run the router setup wizard on your computer to finish the router configuration.
  • If your computer doesn’t support the CD-ROM, launch the default browser and enter your router’s IP address in the URL field. Hit Enter to access the router’s web-based utility.
  • If prompted, enter ‘admin’ as your Username and Password and click OK.
  • Head to the Setup tab and go to the Basic Setup screen.
  • Select Internet Setup from the left-side panel and choose any one of the following options as your Internet connection type.
  • Automatic Configuration-DHCP
  • Static IP
  • PPPoE
  • PPTP
  • To secure your Wi-Fi network, change the password and security mode under the Wireless Security section.
  • If necessary, you can also change the wireless network name (SSID) and network key.
  • When you are all set, click the Save Settings button.
  • You have now seen the Linksys WRT54GR router setup procedure.

Related Articles

Top z