How To Do Netgear N450 WNR2500 Setup?

 Netgear N450 WNR2500 Setup

Netgear N450 WNR2500 is a wireless router that is most suitable for medium to large homes. It offers faster downloads, HD streaming, and Internet gaming. To know about Netgear N450 WNR2500 setup, proceed with the step-by-step instructions given on this page.

Step 1 - Unpack Your Netgear Router

  • Take out the Netgear router from the box.
  • Check if the box contains the AC power adapter, Ethernet cable, and installation guide.

Step 2 - Prepare Your Netgear Router

  • Remove the protective film from the router.
  • Place the router closer to your computer.

Step 3 - Connection Between Your Modem & Router

  • Take an Ethernet cable and connect one of its ends to the router’s Internet port.
  • Plug in the Ethernet cable’s other end to your modem’s rear port.

Step 4 - Connection Between Your Computer & Router

  • Take another Ethernet cable and connect it between your router’s LAN port and computer’s Ethernet port. Check out this Ethernet Ports, if your not working properly.

Step 5 - Turn On Your Modem

If you have turned off the modem, turn it on. Now we enter the vital part for Netgear N450 WNR2500 setup

Step 6 - Power Up The Router

  • Plug in the Netgear N450 router’s power adapter into an AC outlet.
  • Connect the power connector to the router.
  • Check if the Power LED turns green. It indicates that the router is turned on.
  • Also, make sure both the Wi-Fi and Internet LEDs turn on.

Step 7 - Netgear Genie Setup

  • Open any internet browser on the computer that is connected to the router.
  • If you are setting up the router for the first time, the Netgear genie screen will appear automatically on the screen.
  • Carry out the instructions on the screen to finish the router setup.

Step 8 - Router Firmware Update

  • If prompted for a firmware update, select the Yes option.
  • Note: Do not turn off the router and computer while updating the router’s firmware.

Step 9 - Customize Your Router Settings

  • Once the firmware has been updated, you will see the router’s dashboard.
  • You can customize the settings as required.
  • Most importantly, you have to change the default router password.
  • Navigate to the Basic tab and click the Wireless option.
  • Choose your preferred security option.
  • Create a new passphrase (password) and click Apply.
  • You can even change the router’s admin password if necessary.
  • Once you complete the Netgear N450 WNR2500 router setup, you can access the Netgear genie page using the router’s admin name and password.

If you need remote assistance for Netgear N450 WNR2500 setup, contact our technical support team.

Related Articles

Top z