How To Setup Linksys Router As Wireless Bridge?

You can setup Linksys router as wireless bridge when you have to perform the following functions:

  • When you wish to connect two routers with the capability to share your network resources.
  • When you want to utilize your router as an additional access point.
  • In case you wish to connect the router to a modem/router from your ISP.
  • If you want to disable your router functionalities to work with third-party devices.

Things To Keep

  • Main router-This will be your main router. It could also be modem/router that your ISP has provided.
  • Active internet connection with the main router.
  • Two Ethernet cables.
  • Linksys Smart Wi-Fi router containing Bridge Mode capability.

Important Note: When you set your Linksys Smart Wi-Fi router to the Bridge Mode, all of the router capabilities will get disabled. Your router will be converted into an access point. In addition, your router will stop acting as a DHCP server. The router’s built-in firewall and NAT features will not function.

It's Apply Only Linksys Utilizes Classic Web-based Setup Page.

  • In case you have configured your router by utilizing the Linksys Connect software, you need to reset it to its factory defaults.
  • Make use of a paper clip or a pin to press and hold the router’s Reset button for 10 seconds.
  • Next, unplug the router from the wall socket. After 30 seconds, plug it back into the wall socket.
  • Please wait until you see the Power LED turning solid.

Now, to setup Linksys router as wireless bridge, please carry out the instructions given here

Setup Linksys Router As Wireless Bridge


  • First, make use of an Ethernet cable to connect your computer to the router with the Bridge Mode capability.
  • For the connection, you can utilize any one of the numbered ports present in the router.
  • As of now, please avoid connecting anything to the Internet port.

Note: The router that you have set to the Bridge Mode must remain connected to your main router through the Ethernet cable. You cannot form a wireless connection between these two routers.


  • Take hold of the power adapter. Plug one of its ends into a wall socket and the other end to the Linksys router.


  • The default IP address of your Linksys router will be
  • On your computer, open the default web browser and type in the above IP address (in the Address bar of the browser).
  • Please do not forget to press the Enter key after you have typed in the IP address to setup Linksys router as wireless bridge


  • You will find a prompt that asks you to enter the router’s username and password.
  • After you type in the log-in credentials in the respective text boxes, click on the OK button.
  • The default username and password will be admin.


  • You will now see a warning window on your screen.
  • In the window, select the checkbox provided next to the Do not show me this again option.
  • Click on the OK button.


  • You will now find yourself on the web-based setup page of your router.
  • On the setup page, go to the Internet Setup section and set your Internet Connection Type to Bridge Mode.


  • Now, set the Router Address field to Specify an IP address. Next, enter the details provided below (in the respective fields) to setup Linksys router as wireless bridge:
  • In the Internet IPv4 Address field, enter the address that is used for your Linksys router. Its value must be on the same range as that of your main router.
  • In the Subnet Mask field, you have to enter a value that is the same as that of your main router.
  • In the Default Gateway field, you have to enter the main router’s IP address.
  • Once you are done with entering all of the above information, click on the Save Settings button.


It is now time to connect your main router to the Linksys router’s Internet port. Note: The SSID or the Wireless Network Name for each router has to be different. You have now successfully set your Linksys Smart Wi-Fi router to Bridge Mode. You can now start using it as an access point. By doing this, you can extend your wireless network. We have now discussed the steps involved in setup Linksys router as wireless bridge.


Related Articles

Top z