How To Configure Tp-Link Archer C20i Router Setup?

TP-Link Archer C20i Router Setup

Scroll down this page to know how to perform the TP-Link Archer C20i router setup for the first time.Ready to upgrade your old router with the next generation Wi-Fi standard 802.11ac router? Then TP-Link Archer C201 is the best choice. This router is also compatible with 802.11n and offers three times faster wireless speed than any other Wi-Fi router.

Some of the features offered by this router are:

  • 733 Mbps Dual Band Connections.
  • Stable Omnidirectional Signal and Superior coverage.
  • Parental Control.
  • Easy to set up and use.
  • Tether app.

Now, let’s see how to set up the TP-Link Archer C20i router.

Step 1: Hardware setup

Method 1: Using an Ethernet cable

  • Make sure that the antennas are mounted correctly on your router.
  • Connect your router directly to a wall outlet from your ISP using an Ethernet cable.
  • Turn on the router. Wait for it to become stable.

Method 2: Using a DSL/Cable/Satellite modem

  • Install the antennas on your route.
  • Turn off your modem and disconnect its backup battery (if available).
  • Now, connect the TP-Link router to your modem using an Ethernet cable.
  • Turn on your router first.
  • Once it becomes stable, turn on your modem.

To complete the TP-Link Archer C20i router setup, you need to configure the router settings on its web access page.

Step 2: Configuration via Web Browser

Connect your computer to the TP-Link router over a wired or wireless connection. The below section explains both the methods in detail.

Method 1: Wired Connection

  • Turn off Wi-Fi on your computer.
  • Using an Ethernet cable, connect your router to the computer.
  • Now, open the desired web browser on your computer.
  • Go type or in the address bar of the router. If prompted, create a password.
  • After logging in to the router’s web access page, click the Quick Setup tab.
  • Configure the router settings by following the on-screen instructions.

Method 2: Wireless Connection

  • Enable the Wi-Fi option on your computer if it is disabled.
  • Now, the wireless networks within your computer’s range will be listed on the screen.
  • Select your wireless network and enter its password in the given field.
  • Once the computer is connected to the router over Wi-Fi, go to the router access page and complete the Quick Setup.

To know more about the TP-Link Archer C20i router setup, contact us.

Related Articles

Top z