How TO Configure Tp-Link Archer C9 Router Setup?

The TP-Link Archer C9 router is a wireless, dual-band, gigabit router. This router can meet the requirements of the Small Office/Home Office networks. This router has an intuitive web interface and so can be set up easily and quickly. You need to keep the router in a place where it can be connected to the power source and multiple devices. Choose a location that is away from Bluetooth devices and cordless phones. Scroll down this page to get TP link Archer c9 setup.

Let us now see how to perform the TP-Link Archer C9 router set up.

TP link Archer c9 Setup

  • In case you have the Internet connection via an Ethernet cable from the wall socket instead of the cable/DSL/satellite modem, follow these steps. Otherwise, proceed with the steps starting from the installation of the antennas:
  • Connect the Ethernet cable directly to the Internet port on the Archer C9 router.
  • Turn on your router.
  • Confirm that the Power LED, 2.4 GHz LED, 5 GHz LED, and Internet LED are on and solid.
  • The first step is to install the antennas.
  • The second step will be to turn off your modem. In case it has a backup battery, remove it.
  • Make use of the Ethernet cable to connect the modem to the Internet port on the Archer C9 router. Then, continue with the steps to perform your TP link Archer c9 setup.
  • You can now turn off the modem. Wait for approximately 2 minutes for the modem to restart.
  • It is now time to turn on the router.
  • Confirm that the LEDs given below are on and solid. Once you have checked them, you can continue with the setup.
  • The Power LED
  • The 2.4 GHz LED
  • The 5 GHz LED
  • The Internet LED

Important Note: In case the 2.4 GHz and the 5 GHz LEDs are off, you have to press the Wi-Fi button on the side panel for 2 seconds. Wait patiently for a few seconds and then check if both the LEDs are on.Now, the hardware part of the setup is over. We shall start with the configuration through the web browser. So, read the next section to know the procedure to perform the TP link Archer c9 setup.

Configuring through the web browser:

  • First, connect your router and computer using a wired or wireless connection. If you are making use of a wired connection, turn off the Wi-Fi on your computer and then connect the router to the computer. In case you are using a wireless connection, you have to provide the default Wireless Network Name (SSID) and the Wireless Password. Both these details will be printed on the label located on the router’s rear panel.
  • Once you have connected the router and the computer, you can start configuring your router using a web browser. Make use of these steps to do the same.
  • Open the default web browser on your computer.
  • In the address or URL bar of the browser, type
  • You will now be taken to your Archer C9 router’s login page. Use admin for the username and password. Here, admin is the default username and password. Then, click on the Login button to execute the TP link Archer c9 setup.
  • On the next page, choose your Region and Time zone. Then, click on the Next button.
  • You can either choose your WAN Connection Type or click on the Auto Detect button (if you aren’t sure of the connection type). Click on the Next button and continue with the on-screen instructions.
  • Utilize the default wireless settings or alter them, if necessary. Click Next. In case you modify the default username and password, note them down. You will need them later.
  • You can now confirm all your settings and click on the Save button. Click on the Back button if you need to make any changes on the previous page.
  • It is now time to test your Internet connection.
  • Finally, click on the Finish button and exit from the current page.
  • You have now successfully complete the TP link Archer c9 setup.

Related Articles

Top z