Tp-Link Archer D9 Router Setup - Complete Guide

 Tp-Link Archer D9 Router Setup

TP-Link Archer D9 router setup is a dual-band wireless router that comes with the 802.11ac Wi-Fi technology built-in. The maximum wireless speed of this router is 1900Mbps. It also allows you to connect two or three devices at the same time.

Some of the features of this router are listed below:

  • Broad Wi-Fi Coverage.
  • Increased Stability.
  • Powerful Processor.
  • Easy USB Sharing.
  • Guest Network.
  • Parental Control.
  • Easy to Use.
  • Supports IPv6.

Now, let’s see how to perform the TP-Link Archer D9 router setup.

Step 1: Connect the ADSL cable

  • Plug the enclosed splitter into your wall socket.
  • Connect your TP-Link router to the splitter using an ADSL cable.
  • Make sure to connect the cable securely.

Step 2: Connect the router to a power outlet

  • Plug your TP-Link router into a power outlet using the cable provided.
  • Turn on your router.

Step 3: Enable Wi-Fi

  • When the router turns on for the first time, all the LEDs will start to blink for a while.
  • After a few seconds, check the status of the LEDs.
  • If the Wi-Fi light is blinking, then press the Wi-Fi ON/OFF button available at the back of the router to enable it.

Step 4: Setting up the router

You can perform the TP-Link Archer D9 router setup over a wired or wireless connection. The below section explains both the methods in detail.

Method 1: Wireless

  • Enable Wi-Fi on your computer.
  • Look for the wireless network named TP-Link Archer D9 and select it.
  • Now, you’ll be asked to enter the network password. You can find the network password at the back of your router.
  • Enter the password in the corresponding field and click Connect.

Method 2: Wired

  • Connect your router directly to your desktop or laptop using an Ethernet cable.
  • Make sure to connect the cable securely.

Step 5: Configuring the router settings

The last step of the TP-Link Archer D9 router setup is configuring its settings.

  • Open a web browser on your computer.
  • Go to the following web page:
  • Enter admin in both the Username and Password fields.
  • Click the Login button.
  • Now, the router’s main web access page will open.
  • Click the Quick Setup tab followed by the Next button.
  • Configure your router settings as per your desire by following the on-screen instructions.
  • If you’re a mobile phone user, then you can use the Tether app to configure the router settings.
  • Install the app from the Apple App Store or Google Play Store on your iOS or Android device.
  • Launch the app and configure the router settings.

If you have any doubts about how to perform the TP-Link Archer D9 router setup, then contact us.

Related Articles

Top z