How To Solve TP-Link router overheating Issue?

When compared to winter, your TP-Link router might be overheated during summer due to an increase in temperature. Moreover, continuous usage and excessive traffic are the major reasons for the router to overheat. This will damage the internal components. To resolve the TP-Link router overheating problem, proceed with the simple troubleshooting steps given on this web page.

Symptoms of router overheating

Here are the symptoms of router overheating. Using these, you can determine whether your router is overheated or not.

TP-Link Router Overheating

  • Lost internet connection
  • Slow computer operation
  • Flickering light
  • Hardware failure

Solutions to avoid overheating

Router placement

Step 1

  • Your TP-Link router has to be placed in a cool and well-ventilated environment.
  • The router must not be placed in a place where the temperature exceeds the router’s operating temperature.
  • This will prevent the TP-Link router from overheating.

Step 2

  • Avoid placing the router on top of any electronic device.

Step 3

  • Keep the router away from direct heat (fireplaces and space heaters) and sunlight.

Step 4

  • The room where the router is placed must have enough airflow.

Step 5

  • Do not place the router against a wall or any surfaces. It will block one side of the vent. As a result, the router’s temperature increases.

Step 6

  • You are recommended to keep the router in a vertical position. This will allow better heat dissipation.

Power supply

Step 1

  • Ensure that you are using only the power cord that is included in the router package.

Step 2

  • Inspect the power supply.

Clean the router

Step 1

  • Each router has vents or openings on the router’s panel to dissipate the generated heat.
  • Note: Usually, you can find the router’s air vents on the router's rear panel or sides.

Step 2

  • Make sure the router is turned off.
  • With compressed air, clean the vents of the router.
  • This will clear all the dust blocking the air vent.

Step 3

  • You are strongly recommended to clean the router regularly to avoid the TP-Link router overheating problem.
  • Do not place cloths on the air vent.

Turn off the router

Step 1

  • When the router is not in use, turn off the router and unplug the power cord.
  • Also, you have to disconnect the power cord from the power source.

Step 2

  • Power up the router only when needed.
  • If you have any doubts about fixing the TP-Link router overheating problem, click the Call button on this page. Our experts will assist you.

Related Articles

Top z