How To Perform Tp-Link Tl-Wr843nd Router Setup?

Tp-Link Tl-Wr843nd router setup - TP-Link TL-WR843ND is a 300Mbps wireless AP/Client router powered by 2*2 MIMO technology. This router is designed to deliver exceptional range and speed that can satisfy the small office and home office needs.

It Also Offers The Following Features

 Tp-Link Tl-Wr843nd Router Setup

  • Incredible speed.
  • Multiple working modes: WISP Client Router mode and Standard Wireless Router mode.
  • Multiple Security Protection.
  • Flexible Access Control.
  • Simple and easy to install.
  • Supports UPnP, Dynamic DNS, Static Routing, Special Application, DMZ host, and Virtual Server.
  • It also offers firmware upgrades, web management, flow statistics, parental control, and access control.

Scroll down this page to know how to perform the TL-WR843ND router setup for the first time.

System Requirements

  • Broadband Internet Access service.
  • DLS/Cable modem with an RJ45 connector.
  • PCs with an Ethernet adapter & cable and TCP/IP protocol.
  • Browser: Mozilla Firefox, Apple Safari, or Microsoft Internet Explorer.

Step 1: Place The Router

  • Unpack your TP-Link router if you haven’t done it yet.
  • Now, place the router closer to your network modem.
  • Make sure to install the antennas properly on your TP-Link router.

Step 2: Physical Setup

As discussed above, this router supports two types of working modes: WISP Client Router and Standard Wireless Router. So, the steps for the physical setup will vary based on the modes. The below section explains both the methods in detail.

Method 1: WISP Client Router Mode

  • Get an Ethernet cable and using it connect your router to your PC.
  • Connect the router to an electrical wall socket and turn it ON.

Method 2: Standard Wireless Router

  • Connect your PC to the router’s LAN port using an Ethernet cable.
  • Using another Ethernet cable, connect your modem to the Internet port of your TP-Link router.
  • Connect your router to an electrical wall socket.
  • Press the Power button on its control panel to turn it ON.

Step 3: Router Settings Using Quick Setup Wizard

Before starting the TP-Link TL-R843ND router setup using Quick Setup Wizard, make sure that you know your router’s default domain name and IP address. Verify the router’s domain name and IP address using the information given below.Default domain name: Default IP address:

  • Make sure that your PC (Windows or Mac) is connected to the TP-Link router’s network.
  • Now, open the Mozilla Firefox, Safari, or Google Chrome web browser on your computer.
  • In the search field of the browser, enter either your router’s domain name or IP address and tap the Enter button on your PC’s keyboard.
  • In the Login dialog box of your router, type the router’s default user name and password.
  • Once you reach the router’s web access page, configure the basic network settings. Go to the Working mode section and select WLAN Connection Type > Wireless > Finish.
  • Make sure to choose the correct working mode when prompted.
  • Similarly, configure the router’s other settings as per your desire.

To get remote assistance in performing the Tp-Link Tl-Wr843nd router setup, contact us.

Related Articles

Top z