192.168.10.1 is an IP address for login the admin panel and changing the WiFi password, SSID, and default router settings at http://192.168.10.1/. WavLink, Comfast, Myrepeater and Pix-Link are just a few of the WiFi repeaters and router brands that pre-assign it as the default gateway address for accessing the router panel.
Steps To Login 192.168.10.1
To log in to 192.168.l0.1, follow these steps:
- Connect to your wifi network.
- Open a web browser. Type http://192.168.10.1 or simply 192.168.I0.1 in the address bar.
- A login page will appear, requesting you to enter your username and password.
- Username: admin
- Password: admin or password (list of default usernames and passwords)
- You are now logged into the admin interface of your router.
- Now you can change your router settings from there.
- Note: In many cases, the manufacturers of routers put a default username and password combination into their devices. This information very often comes with a sticker on the back or bottom of your router.
Troubleshooting Login Issues
Encountering difficulties logging in? Here are some troubleshooting tips:
- Double-check the IP Address: Ensure you’ve typed the IP address correctly (192.168.10.1) and haven’t included any typos or extra spaces.
- Verify Network Connection: Make sure your device is connected to the Wi-Fi network managed by the router you’re trying to access.
- Try a Different Browser: If the issue persists in a specific browser, try accessing the admin panel using a different browser.
- Clear Browser Cache: Sometimes, a cluttered browser cache can cause problems. Try clearing your browser’s cache and cookies before attempting to login again.
Forgot IP Address Username and Password?
Check the Manual if you have got the Router Password and Username. You can view our list of router default usernames and passwords.
- Find the reset button of your router at the back of it.
- With the help of a pointed object (sewing needle or paper clip) press and press the reset button down for ten to fifteen seconds.
- These steps will recover everything to its default state, including the updated username/password. Log in with your default credentials after that.
FAQs:
A: To access the router admin panel, open a web browser and type http://192.168.10.1/ in the address bar. Enter the router’s username and password upon prompting. If you didn’t change the credentials, refer to the router’s manual as default passwords are provided there.
A: If you can’t access the Router Admin Panel using 192.168.l0.1 make sure that you connect to the router’s network through Ethernet cable or WiFi. Moreover, be sure and enter the correct IP address. If this is still a problem, try power cycling your router or restoring it to its factory settings (this will reset all settings).
A: Yes, you are able to change the default gateway IP address by accessing the router settings. Nevertheless, it’s wise to stay with the default if you haven’t got any reason to change it, as changing it can potentially lead to network problems if not done right.
A: Routers use the 192.168. 10.1 IP address, that enables users to give directions to the features and settings they aim to have access to and manage. To log in to your router’s admin panel, all you need to do is type http://192.168.10.1 into the address bar, press the “Enter” key, and put the correct admin username and password in.