Velop uses a parent node connected to the modem and child nodes that join the mesh. The colour that means “ready for setup” varies across generations: many classic Velop units use purple, while some newer Linksys mesh instructions use blue.
What is specific to this product family?
| Node roles | The parent node connects to the modem; child nodes extend the mesh. |
|---|---|
| Setup distance | Official instructions commonly recommend adding a child near the parent—often within about 10 feet—before relocating it. |
| Do not reset everything | If one child is red or not ready, reset that child rather than the working parent network. |
| Bridge mode | In the Linksys app: Advanced Settings > Internet Settings > Connection Type > Bridge Mode on supported versions. |
| Backhaul | Ethernet can improve a compatible child-node link; verify topology in the Linksys app after cabling. |
Choose your model guide
Linksys Velop WHW03 Setup, Purple/Red Light and Bridge Mode
Install classic Linksys Velop WHW03 nodes, use the purple ready state, fix red child nodes, choose bridge mode and improve placement.
Read model guide →MX4200Linksys Velop MX4200 Setup and WiFi 6 Mesh Fixes
Configure Linksys Velop MX4200 WiFi 6 mesh, add child nodes, diagnose red status, use Ethernet backhaul and bridge mode.
Read model guide →Before using a generic fix
Check the model number, hardware revision and role of the device. A router and satellite from the same brand can use different firmware files and reset indicators. General advice is useful for diagnosis, but destructive steps must follow the product documentation.